Waste & Cleaning
The STOKOTA group offers a wide range of waste transport vehicles in the sector of industrial and general cleaning. Our engineering department focused on the development and manufacturing of vehicles for the environmental sector that work efficiently, are user-friendly and minimize the impact of the environment.
We offer the following products:
» Ecocycle
» Powervac
» Vactrans
Drain Force
When large jetting flows are required for the job, our DRAIN FORCE is the vehicle you require.
The standard Drain Force is well equipped to handle all cleaning of drains of up to 1.500mm in diameter.
It is build on a 4-axle rigid chassis and is equipped with a sludge barrel in SS. The large jetting water tank is executed as saddle water tanks to provide a better weight division.
To ensure good suction power, it is equipped with a powerful liquid ring pump of 3.000m³/h, together with a separate compressor for easy discharge of liquids.
To enable efficient and smooth cleaning of drains and canals, a high performance jetting pump of 345L/min at 200 bar is installed on the unit.
The large capacity jetting hose reel at the rear, fully hydraulically operated, enables the operators to carry out the job fast and efficiently.
For more flexibility, the unit can be built according to the latest ADR regulations for handling dangerous waste.
Technical Specifications
DRAIN FORCE
|
Execution |
|
|
Waste |
suitable for non hazardous waste products |
|
Option |
for hazardous waste products acc. ADR 2005 - §6.10 - tankcode L4AH & S4AH |
|
Chassis |
|
|
Type |
4 axle rigid |
|
Power take-off |
transfer case with 4 PTO's |
|
|
PTO on the gearbox with single outlet |
|
Pressur- vacuum tank |
|
|
Shape |
cylindrical tank - stainless steel 316L (1.4404) |
|
Capacity |
14.500 L |
|
Tipping tank |
yes |
|
Manhole |
1 off |
|
Walkway |
full length on both sides |
|
Rear door |
full hydraulic opening upwards |
|
Rear door clamps |
hydraulically operated |
|
Inlet valve |
ND150 |
|
Outlet valve |
ND150 |
|
Vacuum pump |
|
|
Type |
liquid ring vacuum pump |
|
Flow |
±3.000 m³/h |
|
Drive |
mechanical |
|
Ductwork |
in mild steel (ADR = stainless steel) |
|
Outlet |
through chimney outlet |
|
Compressor |
|
|
Type |
rotary vane type |
|
Flow |
165 m³/h |
|
Max pressure |
0,5 bar (ADR = 2 bars) |
|
Drive |
hydraulic |
|
Jetting pump |
|
|
Type |
triple piston jetting pump |
|
Flow |
±345 L/min |
|
Pressure |
±200 bar |
|
Drive |
mechanical |
|
Pressure reg. Valve |
pneumatically operated |
|
Watertank |
in stainless steel - 6.000 L |
|
Hose reel |
swivels horizontally - manual |
|
|
mounted on rear cover |
|
|
120m - 1 1/4" jetting hose |
|
|
hydraulically driven |
|
|
automatic hose guidance |
|
Sec. hose reel |
fixed mounted |
|
|
mounted on the side |
|
|
40m - 1/2" hose |
|
|
manually operated |
|
Further equipment |
|
|
|
hose rack |
|
|
multicompartment toolbox |
|
|
rotary beacons |
|
|
worklights |
|
Finishing |
|
|
Outside |
acrylic paint |
