Waste & Cleaning
The STOKOTA group offers a wide range of waste transport vehicles in the sector of industrial and general cleaning. Our engineering department focused on the development and manufacturing of vehicles for the environmental sector that work efficiently, are user-friendly and minimize the impact of the environment.
We offer the following products:
» Ecocycle
» Powervac
» Vactrans
Jetting Master
The JETTING MASTER is the vehicle you needif very high pressure jetting is needed
Our Jetting Master is especially designed for dealing with all kinds of cleaning jobs where VHP is required, like the unblocking of pipes, tank cleaning, surface cleaning, and special industrial cleaning jobs.
To enable the handling of all tasks in industrial cleaning, the unit is fully designed according to the latest ADR regulations for the carriage of dangerous wastes.
It is standard built on a 4-axle rigid chassis with a sludge barrel in SS and large jetting water tanks executed as saddle water tanks to provide a better weight division.
The vehicle is equipped with a powerful liquid ring vacuum pump of 3.000m³/h, together with a separate compressor for easy discharge of liquids.
A high performance jetting pump of up to 1.000 bar is installed on this unit with a flow of 90L/min.
The HP jetting hose reel, located at the rear, is hydraulically operated, which enables the operators to carry out the job safely and efficiently.
Technical Specifications
JETTING MASTER
|
Execution |
|
|
Waste |
for hazardous waste products acc. |
|
Chassis |
|
|
Type |
4 axle rigid |
|
Power take-off |
transfer case with 4 PTO's |
|
Pressure-vacuum tank |
|
|
Shape |
cylindrical tank - stainless steel |
|
Capacity |
14.500 L |
|
Tipping tank |
Yes |
|
Manhole |
1 off |
|
Walkway |
full length on both sides |
|
Rear door |
full hydraulic opening upwards |
|
Rear door clamps |
hydraulically operated |
|
Inlet valve |
ND150 |
|
Outlet valve |
ND150 |
|
Vacuum pump |
|
|
Type |
liquid ring vacuum pump |
|
Flow |
±3.000 m³/h |
|
Drive |
mechanical |
|
Ductwork |
in stainless steel |
|
Outlet |
through chimney outlet |
|
Compressor |
|
|
Type |
rotary vane type |
|
Flow |
165 m³/h |
|
Max pressure |
2 bars |
|
Drive |
hydraulic |
|
Jetting pump |
|
|
Type |
triple piston jetting pump |
|
Flow |
±90 L/min |
|
Pressure |
±1.000 bar |
|
Drive |
mechanical |
|
Pressure reg. Valve |
pneumatically operated |
|
Water tank |
in stainless steel - 6.000 L |
|
Hose reel |
swivels horizontally - manual |
|
|
mounted on rear cover |
|
|
120m - 3/4" jetting hose |
|
|
hydraulically driven |
|
Further equipment |
|
|
|
hose rack |
|
|
multicompartment toolbox |
|
|
rotary beacons |
|
|
worklights |
|
Finishing |
|
|
Outside |
acrylic paint |
